Filter
Top Products
DM550
Stand-mount/Bookshelf loudspeaker system
Product Summary
●
The tailored two-way closed box design incorporates a 6in bass/midrange driver with a
large magnet assembly thrusting high pressure sound reproduced to precise limits dictated by
the dimensions of small enclosure.
●
A one piece moulding has been used to strengthen the cabinet rigidity between drivers and
front baffle. The metal-domed high frequency unit dictated by CAD allows the simplest of
crossovers to be used. All of which increases cost-effectiveness without impairing linearity.
Technical highlights
●
B&W's Tweeter technology ensures that the sound remains focused and time sensitive and
that the stereo image is presented with unparalleled three dimensional accuracy.
●
The cabinets feature a specially designed high density front baffle which achieves almost
Matrix-like stability in strengthening overall enclosure construction. The bevel edges of the front
moulding reduce diffraction and improve dispersion.
●
The crossover components use heavy gauge wire throughout and new drivers guarantee not
only high reliability but ensure that top specifications are met.
B&W Loudspeakers Ltd reserves the right to amend details of the specifications without notice in line with technical developments. E & OE. All trademarks acknowledged.
www.bwspeakers.com
Drive Units
Frequency Response
1 x 26mm high-frequency with
aluminium dome, One 26mm coil on
aluminium former, wound with polymide
resin and heat cured
1 x 160mm bass/midrange with
composite short fibre, 26mm coil on
high temperature former, wound with
polymide resin and heat cured
75Hz – 20kHz ± 2.5dB on reference
axis
Sensitivity
Nominal Impedance
Power Handling
Dimensions
Finish
87dB spl(2.83V 1m)
8 ohms
10W – 75W into 8 ohms on
unclipped programme
Height: 352mm Width: 204mm
Depth: 243mm
Black ash or walnut vinyl