Bowers & Wilkins CT SW10 Home Theater System User Manual

Kevlar is a registered trademark of DuPont.
ICEpower is a registered trademark of B&O ICEpower A/S.
Speakon is a registered trademark of Neutrik AG
Copyright © B&W Group Ltd. E&OE
B&W Group Ltd reserves the right to amend details of the
specification without notice in line with technical developments
B&W Group (UK Sales)
T +44 1903 221 500
B&W Group North America
T +1 978 664 2870
B&W Group Asia Ltd
T +852 3 472 9300
B&W Group Ltd
Dale Road
Worthing West Sussex
BN11 2BH England
T +44 (0) 1903 221800
F +44 (0) 1903 221801
Subwoofer Amplifier
SA 1000
This new 2U rack mount Class D subwoofer amplifier is based upon ICEpower® technology and is purposely designed
to drive the CT subwoofers. This Class D amplifier is incredibly powerful and stable and will allow the CT subwoofers
to produce fantastic amounts of tight slamming bass. The SA1000 allows for up to two of the same subwoofers to be
driven simultaneously.
Listening is believing
Technical Specications
Amplifier functions
Amplifier inputs
Amplifier outputs
Amplifier power output
Input impedance
Signal / noise
Amplifier rated power
Net weight
Dedicated CT SW rack-mount single channel
1000W amplifier
Front panel controls:
Rotary volume (line in)
Rotary low-pass filter frequency (4th-order Linkwitz,
40Hz - 140Hz)
Low-pass filter defeat 2-posn switch
Phase 0/180 2-position switch
Bass extension 3-position switch
Movie/music EQ 2-position switch
On/auto/standby 3-position switch
Status LED
Fault LED
Line In (XLR & RCA phono)
1x RCA phono socket, line in
1x RCA phono socket, link out
1x XLR socket, line in
1x XLR socket, link out
3.5mm jack - 12V trigger on/standby (overrides
manual standby setting)
3.5mm jack - 12V trigger equalization movie/music
1x Speakon 4-pole speaker socket
2x pair of Binding Posts
34 Watt – Idling
3 Watt - Standby
Height: 100mm (3.9 in) [88.5mm (3.5 in) plus feet]
Width: 430mm (16.9 in)
Depth: 322mm (12.7 in)
Front panel Height: 2U 88.1mm/3.5”
6.45kg (14.3 lb)