Ayre Acoustics K-5x Stereo Amplifier User Manual


 
This will prevent the undesired possibility of
creating a feedback loop when making a recording.
Main Outputs
The balanced outputs use
XLR connectors, while the
unbalanced outputs use RCA
connectors.
The Ayre K-5x offers one pair of balanced outputs
and one pair of unbalanced outputs. Both pairs of
outputs may be used simultaneously. However,
please note that the level of the unbalanced outputs
will be 6 dB lower than the balanced outputs.
AC Power
The best sound quality is
normally achieved when the
K-5x is plugged directly into
the wall outlet, without using
any power strips or power line
conditioners.
Connect the Ayre K-5x to an unswitched power
source. When the unit is first connected to the AC
power, the input selector will default to “Star”, the
volume control will default to “11”, the display will
be set to “On”, and both the mute and record output
will be set to “Off”. Removing the AC power from
the unit will cause it to lose its current settings and
revert to the default settings.
5
Volts
50/60 Hertz
10 W Max
Tape
Out
Ta pe
Out
S2S2 S1S1
B2 B2
B1 B1
K-5 Stereo Preamplifier
A y r e
Boulder, Colorado USA
Right Channel
Outputs
Left Channel
Outputs
S.N.