Auralex Acoustics Performance Series Speaker System User Manual


  Open as PDF
of 2
 
A.
Using Tubetak™, mount two (2) LENRD Bass Traps in each vertical
corner. We suggest you install the LENRDs starting at the
ceiling. However, we understand that not all corners are the
same. At the very least, place LENRDs in the upper most
section of the vertical corners. If you have doors, windows
or other obstacles blocking your corners, it is acceptable to
place them in the horizontal, wall/ceiling corners.
B.
Using Tubetak, mount Studiofoam panels
on the front wall, between and behind the
neareld monitors. The graphic below shows eight
(8) panels across the front wall. The pattern in your
room does not have to be identical, but placement
across this wall is strongly encouraged.
Auralex Project Roominators Kit
Congratulations! You now have a higher quality listening environment.
The Auralex Project Roominators Kit is designed to reduce uncontrolled ambience in smaller home and project
studios. Proper placement of the Studiofoam™ panels and LENRD™ Bass Traps will insure greater clarity in your
listening environment. By following these simple instructions, you’ll end up with the best room you’ve never “heard.”
Includes:
8 - LENRD™ Bass Traps
24 - 2’ x 2’ Studiofoam™ panels
5 - TubeTak™ Adhesives
Roominators Project General Guidelines
For superior acoustics, Auralex suggests mounting LENRD™ Bass
Traps in the corners of your room (for low frequency control) as well
as 2’x2’ Studiofoam™ panels for absorption on the walls and ceiling.
If your room is set up with a mix position against one wall (as many
rooms are), please use the following general guidelines: