Filter
Top Products
CD CONTROL BUTTONS
The RPT button (8) repeats the current track
The SHF button (9) randomly shuffles the tracks.
The SCN button (10) scans the first 5 seconds of each track.
Note: Power can be turned on by pushing any button on the front of the AWM930.
AUXILIARY INPUT
1) Push Power Switch (18) “on”.
2) Using the Source Selectors (19), choose the button labeled “AUX”.
3) If there is an external source (ie. CD shuttle) connected to the Auxiliary In Jacks (22) on the rear of the radio,
then you can listen to your external source through the system.
4) An external auxiliary source can also be used (such as a portable cassette player) through the 1/8” Auxiliary
Stereo Input Jack (15) on the front of the radio.
SETTING THE CLOCK
1) Push the Power Switch (18) “on”.
2) Hold the T/ F button (4).
3) Use the H and M buttons (1 and 2) to adjust hours and minutes.
Note: The T/ F also toggles between time and radio frequency on the display.
SETTING STATIONS INTO MEMORY PRESET
1) This unit has the ability to set 18 FM and 12 AM stations into memory.
2) To set the AM or FM stations into memory, first tune to the desired station.
3) Once at the desired station, press and hold preset button (8, 9, 10, or 11) you wish to program for more than 3
seconds.
4