Filter
Top Products
ARCHITECT
Model 960
Model 961
Installer’s Guide
™
7
Hooking Up Your System
What you’ll need:
1. The Architect™ 900 Series Amplifier.
2. RCA audio hook-up cables.
3. Small blade screwdriver for terminal blocks
4. (Optional) A balanced line driver (of course we recom-
mend the AudioControl BLD-10 and BLR-10) if you are
going to mount the Architect more than 20 feet from the
preamp.
5. Enough speaker wire to reach all of your speakers.
6. Multi-zone audio controller, receiver, or preamplifier.
7. Although you can set the speaker optimization controls
by ear, a real-time audio analyzer such as the
AudioControl Industrial SA-3052 is very helpful.
8. An RJ-45 10BaseT Ethernet connection cable.
(Optional - Architect Model 961)
Hooking Up Your
System
BLR-10 and BLD-10 Balanced Audio Drivers send audio over CAT-5.
Extends high quality audio up to 1000’.
SA-3052