Filter
Top Products
8
Chassis A back panel
1) IEC standard power inlet. Connect here the provided power cord.
2) Fuses(T2A).
3) RS-232 serial port.
4) 25-pin connector for digital control signals.
5) Power plug for external phono amplifier.
6) 4-pin XLR connector for left analogic power supply.
7) 4-pin XLR connector for right analogic power supply.
Chassis B back panel
1) 25-pin connector for digital control signals.
2) 4-pin XLR connector for left analogic power supply.
3) 4-pin XLR connector for left analogic power supply.
4) Left channel unbalanced inputs.
5) Left channel balanced inputs.
6) Right channel unbalanced inputs.
7) Right channel balanced inputs.
8) Unbalanced left output.
9) Balanced left output.
10) Unbalanced right output.
11) Balanced right output.
12) Left tape output.
13) Right tape output.
14) Mono output.