Audio Analogue SRL Maestro Settanta Stereo Amplifier User Manual


 
15
Note: all commands are echoed to the controller. All command except %AAVER are answered with ‘Done<CR><LF>’ when
executed. %AAVER is answered with the version number string. Invalid commands are ignored. Valid commands with
invalid parameters are either not answered or answered with ‘Failed<CR><LF>’.
Configuration through set-up activation
Maestro Settanta is an extremely versatile unit. The controls on the front panel and on the remote controller allow to access to the
most used functions but not to the configuration parameters. To customize the unit configuration, you have to enter the set-up just
pressing the “SET” button on the remote controller. Set-up options will then be shown on the display.
Configurazione attraverso l’attivazione del set-up
Il Maestro Settanta è un apparecchio estremamente versatile. Ovviamente, i controlli disponibili sul pannello frontale o sul
telecomando permettono di accedere alle funzionalità operative di più frequente utilizzo ma non ai parametri di configurazione. Per
personalizzare la configurazione dell’apparecchio è disponibile un completo setup accessibile dal telecomando e visualizzato sul
display del pannello frontale. Il set-up viene richiamato premendo il pulsante “SET” sul telecomando.
Set-up navigation
Due to the reduced size of the display, only one option at a time is shown. Use the remote controller to navigate through the different
options and choose the desired one and also to modify the parameters value. To select an option, press the “SET” button when the
desired option is shown on the display. It is possible to modify the parameters of the selected option pressing the “IN+/IN-“ buttons
on the remote controller. To fix a parameter value, press the “SET” button. To jump back to the upper set-up level or to exit set-up,
choose the “EXIT” option and press the “SET” button.
Navigazione del set-up
A causa dello spazio limitato, sul display del pannello frontale compare una sola voce di menu per volta. Per questo motivo, e anche
per scorrere le varie voci e selezionare quella desiderata, nonché per modificare i valori dei parametri visualizzati, è possibile
navigare il setup dal telecomando. Per selezionare la voce desiderata bisogna premere il tasto “SET” del telecomando quando la
voce desiderata è visualizzata sul display. E’ possibile modificare i parametri relativi alla voce selezionata premendo i tasti “IN+/IN-“
del telecomando. Per memorizzare il valore di un parametro è sufficiente premere il tasto “SET”. Per salire di livello o uscire dal set-
up è sufficiente selezionare la voce EXIT del livello in cui ci si trova e premere il tasto “SET”.
Set-up options
Input 1 Mode: this option allows selecting in 1 use mode (Line, Phono MM, Phono MC)
By-Pass: this option allows choosing which in to use for the “by-pass” mode and to deactivate the “by-pass” mode.
Balance: this option allows modifying the channels relative levels.
Opzioni di set-up
Input 1 Mode: questa opzione consente di scegliere la modalità di utilizzo dell’ingresso 1 (linea, phono MM, phono MC).
By-Pass: questa opzione permette di scegliere quale ingresso utilizzare per la modalità “by-pass” oppure permette di disattivare la
modalità stessa.
Balance: questa opzione consente di modificare i livelli relativi dei due canali rispetto al livello generale di ascolto.