Filter
Top Products
Specifications subject to change without notice
© 2001 Atlas Sound LP Printed in U.S.A. 000501 SL3-1483
245
THREE
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
SQUARE SURFACE ENCLOSURES
FOR 4" AND 8" LOUDSPEAKERS
SE175-4
SM191-78
SE198-4
FEATURES
• Enables Surface Installation of 4" and 8" Loudspeakers
• Versatile Enclosures Mount a Variety of Torsion-Spring and Screw
Mount Atlas Sound Baffles
APPLICATIONS
Utilize Atlas Sound square protective enclosures for surface installa-
tion of 4" (102mm) and 8" (203mm ) loudspeakers in a wide range of
commercial and industrial applications. Models are offered in various
depths and for torsion and screw-mount application of square Atlas
Sound baffles.
GENERAL DESCRIPTION
Atlas Sound square protective enclosures are attractive and cost-ef-
fective assemblies that mount a variety of square Atlas Sound baffles.
All models are of welded CRS construction and undercoated to mini-
mize mechanical and acoustical resonance. Units feature a textured
white epoxy finish.
SE175-4. Aesthetically pleasing and versatile enclosure will
accommodate standard 8" (203mm) dia. loudspeakers and the
corresponding torsion-spring and screw-mount baffles. If an
Atlas Sound torsion-mount baffle is selected, the assembled
unit will be completely void of any visible hardware.
SM191-78. Deluxe enclosure provides an architecturally pleasing
appearance with crisp clean lines that blend well with most building
interiors. Unit accommodates standard 8" (203mm) dia. loudspeakers
and the corresponding screw-mount baffles. Model is also available in
a high-performance extra-depth (8" deep) version with acoustic fiber-
glass. For additional information, refer to technical literature titled
“Enclosures for Extended 8" Loudspeaker Performance” (SL3-1401).
SE198-4. Contemporary enclosure accommodates standard 4"
(102mm) loudspeakers and the corresponding square screw-
mount baffle.
ARCHITECT AND ENGINEER SPECIFICATIONS
Surface enclosure shall be Atlas Sound Model ____. It shall be of weld-
ed CRS and contain undercoating to minimize mechanical/acoustical
resonances. Finish shall be textured white epoxy. Unit shall mount Atlas
Sound baffle Model _____ and (4", 8") loudspeaker Model ______.
SE175-4
SM191-78
SE198-4
ENCLOSURES FOR 8" (203MM) LOUDSPEAKERS
DIMENSIONS MOUNTS
MODEL A B C SQUARE BAFFLE MODELS
SE175-4 11
5
⁄8" (295mm) 11
5
⁄8" (295mm) 4" (102mm) (T)161-8, T620-8, PG-19
SM191-78 12
3
⁄4"(324mm) 12
3
⁄4"(324mm) 4" (102mm) 19-8, 164-8
ENCLOSURES FOR 4" (102MM) LOUDSPEAKERS
DIMENSIONS MOUNTS
MODEL A B C SQUARE BAFFLE MODELS
SE198-4 7
1
⁄8" (181mm) 7
1
⁄8" (181mm) 4
3
⁄8" (111mm) 161-4