Filter
Top Products
Specifications subject to change without notice
57
One
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
AtlasSound.com
© 2007 Atlas Sound LP Printed in U.S.A. ATS002967 RevA 11/07 SL1-3038
INFORMACAST
®
IP COMPLIANT LOUDSPEAKER SYSTEM
POWERED BY CISCO
®
POE NETWORK SWITCHES
I128SYS
FEATURES
• Use with Berbee InformaCast
®
software, Cisco
®
POE networks
& Cisco
®
IP Telephones to create extremely versatile paging and
messaging systems
• Highly efficient 10 oz dual cone loudspeaker system provides 94 dB
average SPL @ 1 W/1 M and is capable of 103 dB @ 1 meter via the
rated power of the internal IP addressable amplifier
• 105˚ dispersion in the 2 kHz octave band (-6 dB)
• Wide frequency response of 86Hz to 8kHz (-3 dB) is perfect for speech
and general messaging playback
APPLICATIONS
The perfect choice for education, military/government, and large scale
corporate applications, Berbee’s InformaCast IP Broadcasting Solution
revolutionizes communication, clock/bell and message playback
functionality. It provides the capability to simultaneously send a multicast
audio stream and text messages to any combination of Cisco IP phones,
Atlas Sound IP speakers, and PCs. With the push of a single button on
the phone or a single click from a PC, a user can send a live, recorded,
or scheduled broadcast to one or more paging groups. With InformaCast
compliant loudspeaker products from Atlas Sound, system designers
and integrators will have the ability to deploy extremely large scale and
complex paging systems over new or existing Cisco networks with the
convenience of centralized administration by IT personnel.
Extreme cost savings can also be realized from the elimination of separate
“stand alone” paging systems when InformaCast is utilized in education
applications in conjunction with the model I128SYS speaker system.
GENERAL DESCRIPTION
Model I128SYS from Atlas Sound consists of a factory assembled
loudspeaker/baffle with PCB amp/control board securely mounted to the
rear of the baffle via concealed weld studs. The amp/control board is
capable of producing 9 Watts RMS into the 8
Ω
loudspeaker with 9VDC
minimum power provided by Cisco IEEE 802.3AF compliant POE switches.
(local 12-18VDC PSUs may also be used instead of POE switches).
Interconnection is via a board mounted female RJ-45 connector. The
industry standard C10A loudspeaker used in the I128SYS is a dual cone
8” (205 mm) loudspeaker with a 10 oz (260 g) ceramic magnet. It includes
a curvelinear paper cone for lower harmonic distortion. The loudspeaker
is also equipped with a full 1" (25 mm) diameter copper voice coil with
aluminum former for better heat dissipation. The 18-gauge construction of
the metal baffle provides security and durability in commercial applications.
The baffle is finished in neutral white electrostatic powder coat and is
packaged with all necessary mounting screws.
I128SYS
(Back View)
I128SYS
(Front View)