Atlas Sound FAP62T Speaker User Manual


  Open as PDF
of 4
 
AtlasSound.com
1/4
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
©2008 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. All other trademarks are the property of their respective owners. ATS001372 RevE 10/08
Strategy Series
®
II In-Ceiling 6" Coaxial Speaker System
FAP62T
Specifications
Power Rating 50 Watts
Transformer Taps 2, 4, 8, 16, & 32 Watts
Frequency Response 63Hz – 20kHz (±7dB)
Sensitivity (1W / 1M) 88dB
Woofer 6" Poly Cone Butyl Rubber Surround
Woofer Magnet Weight 14 oz (398g)
HF Driver 19mm Coaxially Mounted PEI Dome Tweeter
Diameter 12
1
⁄2" (318mm)
Overall Height 8.48" (215mm)
Enclosure Volume 475 in
3
Cut-out Dimensions 11" (279mm)
Features
• ExtendedLowFrequencyResponsefromthe475in
3
Optimally Tuned
and Ported Deep Drawn Galvanized Steel Enclosure
• EasyInstallationinDropTileorSheetrockCeilingsViaC-Ring/V-Rail
TileBridgeand“DogLeg”MountingSystem(Included)
• FrontMountedTapSelectorSwitchforEasySystemTuning
Adjustments Include Transformer Bypass Setting for 8Ω Direct
Coupled Operation
• Unique“TrapDoor”InputSectionAllowsforThroughConduitRuns
with Rigid or Flex Conduit
• 4PoleDetachable“Phoenix”StyleConnectorAllowsEasyPre-Wiring
and Is Convenient for Daisy Chaining Additional Strategy Series Full
Range Speakers or Subwoofers
• “PressFit”GrillesBlendBetterintoContemporaryArchitecture
• EnhancedQuality70.7V/100VInternalTransformersMinimize
InsertionLossandMaintainLowFrequencyResponseWhile
ProvidingIncreasedOutputforHigherSPLApplications
• ULListed1480
Applications
Atlas Sound’s FAP62T combines superior coaxial loudspeaker perfor-
mance with even dispersion and easy installation. A low profile enclosure
and wide coverage make the FAP62T a perfect choice for low ceilings.
The FAP62T will satisfy the needs of owners, architects, contractors,
and consultants by delivering true, high fidelity sound reproduction
in an attractive and easy-to-install system. The FAP62T is ideal for
high-intelligibility voice, music, and signal reproduction in commercial,
industrial, and institutional applications.
General Description
The FAP62T's 110° dispersion angle can reduce the number of
l oudspeakers necessary to achieve coverage in distributed systems with
low ceilings.
The loudspeaker component matches the performance of the legen dary
Atlas Sound FA136 driver. High quality construction 6" coaxial cone type
driverincludesa1”voicecoilandpolypropyleneconewithabutylrubber
surround. The 19mm coaxially mounted tweeter is constructed of PEI. A
high sensitivity of 88dB average (92dB peak) means less power may be
requiredtoachievethedesiredSPL.Thisloudspeakerisfactoryassem-
bled in an optimally tuned and ported deep drawn enclosure and includes
a specially designed 32 watt low saturation 70.7V / 100V transformer.
A convenient front mounted selector switch allows tap selection with-
out the need to remove the speaker from the ceiling. This switch also
includes a transformer bypass setting for 8Ω direct coupled operation.
FAP62T
next