Filter
Top Products
• Tap selector switch located behind speaker magnet with
shaft through center of cone. Selector knob doubles as
dispersion cone and allows tap selection to be done
after speaker is installed in the ceiling
• Lightweight construction makes additional support in
drywall ceilings unnecessary
• Perfect companion with the FASUB70 subwoofer
system when sub bass is required
• Press-fit grille blends perfectly into contemporary architecture
• Tuned & ported design for extended bass response
• Low profile plastic enclosure
• 16 Watt internal transformer
• 8 ohm transformer bypass setting
• Barrier strip connection
• Tile bridge included
• UL 1480 listed
FAP40T Strategy Series
®
II
High Performance In A Very
Compact Footprint
The FAP40T is the newest member of Atlas Sound
Strategy Series
®
II family of ceiling speaker products.
Designed to provide high performance in a very compact
footprint, the FAP40T appeals to both system designers
and architects.
A unique (patent pending) tap selector switch design
allows for easy system tuning. A full selection of taps
up to 16 watts, as well as an 8 ohm bypass setting, is
included for maximum system versatility. This switch
also functions as a diffuser cone, providing smooth, even
dispersion of the high frequency content from the center
of the 4" driver. In fact, the high frequency response of
the FAP40T is so natural that many would assume that
the driver in the FAP40T was a coaxial design instead of
a cone driver.
Low frequency response is enhanced by the tuned
and ported enclosure design. The UL listed (UL1480)
enclosure is constructed of high impact injection molded
plastic and includes a press fit grille design that blends
quite well with contemporary architecture. A tile bridge
is included for suspended ceiling applications. The light-
weight design of the FAP40T, coupled with the “dog leg”
mounting system allows the FAP40T to mount into most
drywall ceilings without the need for a separate mounting
ring. However, for new construction drywall ceiling
applications, the optional FA-TR4 trim ring is available.
Barrier strip connection allows for easy system wiring as
well as “daisy chain” wiring to other FAP40T’s or even
FASUB70 subwoofers (a great combination!)
FAP40T
SPECIFICATIONS
MODEL FAP40T
POWER RATING 16 Watts @ 8 ohm
70.7V TAPS 1, 2, 4, 8, 16
FREQUENCY RESPONSE 85Hz - 15kHz
(±3dB)
SENSITIVITY 87dB Average
(1W/1M)
DISPERSION 105˚ 2kHz Octave Band (-6dB)
WOOFER 4" High Efficiency Polypropylene
W/SBR Surround
WOOFER MAGNET WEIGHT 10 oz (264g)
DIMENSIONS 7.375" (187mm) Bezel Diameter
7.125" (181mm) Overall Height
CUT-OUT DIMENSION 6
5
⁄16" (160mm)
WEIGHT 3 lbs. (1.4kg)
1601 Jack McKay Blvd.
Ennis, TX 75119
AtlasSound.com
Tech Support 800.876.3333
Printed in the USA
Specifications are subject to change without notice.
©2004 Atlas Sound LP. Atlas Sound is a trademark of Atlas Sound LP. All rights reserved.
• Five Year Limited Warranty •
ATS001518 RevC 9/04
000904
484078
With Grille
Without Grille