Atlas Sound CP700 Stereo System User Manual


 
Specifications are subject to change without notice
AtlasSound.com
1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. • TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435
©2005 ATLAS SOUND LP Printed in U.S.A. ATS002102 RevC 9/05 PP
OWNER'S MANUAL
CP700 COMMERCIAL
POWER AMPLIFIER
2
TABLE OF CONTENTS
Introduction, Features, Applications.............................................................………………………………….3
Front Panel Description......................................................................…………………………………..…….4
Rear Panel Description......................................................................…………………………………..……..5
Input Wiring......................................................................…………………………………..…………………..7
Speaker Output Wiring...................................................................................………………………………..9
Specifi cations..........................................................................................…………………………………….15
Warranty................................................................................................……………………………………...16
SAFETY INSTRUCTIONS
Please Read Carefully Before Installing or Operating This Product
• Read instructions fully.
• Pay attention to any and all warnings.
• Connect this amplifi er only to the correct operating voltage.
• Do not attempt to service this unit. Only a qualifi ed service technician should open this unit for
servicing.
• Warning - To reduce the risk of fi re or electric shock, do not expose this appliance to rain or moisture.
HEARING DAMAGE!
All professional loudspeaker systems are easily capable of producing very high sound pressure levels.
Use care with the operation of this amplifi er and wear the appropriate hearing protection. Exposure to
excessive sound pressure levels can cause permanent hearing damage.
SHOCK HAZARD!
The Atlas Sound CP700, when in operation, can produce a shock hazard at the speaker terminals.
Make sure the amplifi er is turned off when installing or removing connections at the speaker terminal
barrier strip. After connecting the proper speaker load, REPLACE the terminal strip cover!
VENTILATION
Although the CP700 is fan cooled and has thermal protection circuitry, allow adequate ventilation to
assure trouble free operation. When rack mounting one or more of the CP700s, install an exhaust fan in
the rack to evacuate heat buildup. Consult Atlas Sound’s Technical Support at 1-800-876-3333 for advice
on thermal management and help with rack selection for this product.
RACK MOUNTING
Although the internal output transformers are mounted close to the front panel when rack mounting the
CP700, be sure the unit is adequately supported.