Atlas Sound AHSUB15S Speaker User Manual


  Open as PDF
of 3
 
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasSound.com
1/3
©2008 Atlas Sound LP. All rights reserved. Atlas Sound is a trademark of Atlas Sound LP. ATS002872 RevB 9/08
Features
• Impressiveefficiencyratingof103dB1W/1Mmakesthe
AHSUB15Saperfectchoiceforlowfrequencyaugmentationofhigh
energymusicplaybackatsportingevents.
• Weather&rodentresistant.
• Rearfiringwoofercavityandmeshscreenoverthe
enclosurefronttoprotectthespeakerfromweather
and/orrodentdamage.
• Weatherresistantconnectionviaaconvenientrecessedterminal
blocklocatedonbackofloudspeaker
• Securesurfacemountingorsuspensioninstallationviatheintegral
forgedeyebolts.
• 500wattspowerhandling
• Maximumoutputof127dB(RatedPower@1M)
Applications
TheAtlasSoundAHSUB15Ssubwoofersystemfeatureshighoutput
andamazinglowfrequencyresponseforindoorandoutdoorapplications
includingfootballstadiums,sportsarenas,baseballfields,andlargeaudi-
toriums.
Unitfeaturesanefficientlowfrequencywooferloadedintoadurable,
weatherresistant,rearfiringenclosure.
Installation
Ground Installation (Recommended)
ExcellentresultsmaybeachievedbymountingtheAHSUB15Sunder
bleacherseating.Electronicdelayissuggestedtoapproximatetime
alignmentoffullrangespeakerswithsubwoofer(s)tothelistener
locations.
OptionalAHSUBSTANDallowseasyinstallationoftheAHSUB15S
underbleacherseatingorotherareaswhereconcreteslabmountingis
possible.StandprovidessecuremountingoftheAHSUB15Sinadown
firingconfigurationtomaximizeoutputperformancewhilehelpingto
preventtheftandweatherdamage.Holesareprovidedonthebracket
feetforanchorpointswhenmountingonconcreteslabandadditional
holesarelocatedontheframetoallowtheAHSUB15Stobeattachedto
theframeviachainorcableforoptimalsecurity.
Overhead Installation
Remember that wind will add considerable torque to the point of
attachment. The mounting surface the speaker is being attached to
should be able to handle five or more times the weight of the AH
speaker (7x recommended for locations subject to high wind forces).
The installer must ensure that the surface is capable of safely and
securely supporting the load. The hardware employed must be safely
and securely attached both to the loudspeaker and the surface in
question. A general rule for soft surface installations (wood beams) is to
multiply the corresponding working load limit by 75%: the result will be
an approximate working load strength.
AHSUB15S
AHSUB15S
15" AH Series Stadium Subwoofer System
AHSUB15S
Mounted
on Optional
AHSUBSTAND
next