Filter
Top Products
Specifications subject to change without notice
307
Five
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
AtlasSound.com
FEATURES
• 1 Mic In w/ Phantom Power
• 2 Stereo Line In
• Dual Line Out
• Pre Out/Power In Patch
• Remote and VOX Activated Mute
• Route any source combination or entire mix bus to Zone 2 (MOH Out)
• Special Low Cut Filter is 6dBu/octave at 400Hz and also bypasses front panel bass
control to allow use with paging horns like the Atlas Sound APX40TN and AP-15T
GENERAL DESCRIPTION
The Atlas Sound AA35 is a 3 input channel mixer amplifier designed for distributed
business paging and background music (BGM) systems, small to medium speech privacy
systems, and in applications where music on hold (MOH) plus paging is required.
With (1) microphone input and (2) stereo line inputs, the AA35 will accommodate a variety
of input sources including paging microphones, CD players, and digital music receivers. A
dip switch selectable matrix allows the creation of a Zone 2 mix from any or all of the input
sources for music or messaging on hold applications. 25V, 70.7V, and 8 Ohm outputs are
provided.
The output power of 35 Watts will match nicely with Atlas Sound FAP, SM, SD, and GD
series loudspeakers. In fact, in an 11’ ceiling application, the AA35 will provide power for
up to 117 SD72W loudspeakers tapped at .25 Watts each while providing upwards of 84dB
in the direct sound field at ear height!
SPECIFICATIONS
Power Rating:
35W RMS @ 70.7V (Maximum average power @ 50Hz to 20kHz with .5% THD)
Inputs:
Input #1 Mic/Line/Tel (optional transformer available)
Inputs 2-3 unbalanced RCA summing line level
Outputs:
Main: 35W RMS 8 Ohm, 25V and 70.7V
Zone 2: 8 Ohms at 1.5 Watts & 600 Ohm line level at 1.5V
Power Consumption:
90 Watts
Dimensions:
8.27" x 3.66" x10.87" (210mm x 94mm x 276mm)
Weight:
10.2 lbs (4.64kg)
STRATEGY SERIES AMPLIFIER
MODEL AA35
AA35
AA35
AA35 (Back View)
© 2006 Atlas Sound Printed in U.S.A. ATS002452 RevA 11/06 SL5-2090