Atlantic Technology IWTS-8e Speaker User Manual


 
Out of site bass performance
Great movie and music experiences are built on a foundation of powerful,
accurate bass. Achieving this kind of bass performance at home typically
requires large, bulky, and obtrusive enclosures.
Atlantic has changed all that—for the better. Now, with our in-wall
subwoofer system, you can get powerful, accurate, and authoritative deep
bass from practically invisible THX Ultra® certified subwoofers that fit in
standard 2 x 4 or 2 x 6 studded walls.
Our IWTS-8e SUB features a powerful dedicated, stand-alone SA-380
amplifier that delivers a prodigious 380 watts RMS into 4 ohms. In addition,
the amplifier is equalized for use specifically with our dual-woofer module,
providing bass response that achieves an in-room response of -3dB at
20Hz! A special servo-feedback circuit in the SA-380 monitors the woofers’
response, and instantly provides a distortion-canceling signal in the event
that any non-linearities are detected. The result: the bass response remains
powerful and clear at all playback levels, even at extreme volume.
The woofer wall module consists of dual ultra-heavy duty 8-inch woofers
mounted in a sealed in-wall enclosure designed to fit into a standard 2 x
4” new construction stud bay. The drivers feature an extremely stiff Coated
Composite Molded Graphite cone with a unique inverted stiffening dust cap.
The driver’s 2-inch Kapton™ voice coil rests in a massive and powerful
8-pound vented magnet assembly. Two of these proprietary drivers equals
the cone area of a single 12-inch woofer, yet with a combined motor
structure larger than most 15- and 18-inch drive units. Since our 8-inch
drivers use very stiff, light cones with enormous motor assemblies, their
input response is extremely quick and accurate. This yields very fast bass
response and exceptionally natural music reproduction.
Product Information Sheet
IWTS-8e In-Wall Subwoofer