Asus DSBV-DX Home Theater System User Manual


 
5-48 Chapter 5: RAID conguration
5.5.4 Managing Arrays
The LSI Logic MPT Setup Utility allows you to perform other tasks related to
conguring and maintaining IM and IME volumes.
Refer to this section to view volume properties, manage the hot spare disk,
synchronize the array, activate the array, and delete the array.
Viewing volume properties
To view volume properties:
1. On the main menu, select
RAID Properties
.
2. On the next screen that appears, select
View Existing Array
.
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item -/+ = Change Item
LSILogicCongUtilityv6.08.05.00(2006.08.02)
Adapter Properties -- SAS1068
Adapter SAS1068
PCI Slot 00
PCI Address(Bus/Dev/Func) 05.03.00
MPT Firmware Revision 1.15.00.00-IR
SAS Address 500E0180:60831008
NVIDIA Version 25.02
Status Disabled
Boot Order 0
Boot Support
(Enabled OS only)
RAID Properties
SAS Topology
Advanced Adapter Properties
Esc = Exit Menu F1/Shift+1 = Help
Enter = Choose array type to create
LSILogicCongUtilityv6.08.05.00(2006.08.02)
Select New Array Type -- SAS1068
View Existing Array Viewtheexistingconguration.
Create IM Volume Create Integrated Mirror Array of 2
disks plus an optional hot spare. Data
on the primary disk may be migrated.
Create IME Volume Create Integrated Mirrored Enhanced
Array of 3 to 8 disks including an
optional hot spare.
ALL DATA
on array disks will be DELETED!
Create IS Volume Create Integrated Striping array of
2 to 8 disks.
ALL DATA
on array disks will be DELETED!