AOC none Stereo System User Manual


 
Page 10of 11
FCT –PL 001 DO
/01
Access Audio Ltd
Available services with the F151s when the FD10 is connected.
Support for fax group 3
When the FD10 is connected, fax Group 3 machines can be connected to the F151s
units. The following fax transmission speeds can be obtained: 2400, 4800 and 9600 bps.
Analogue modem
ITU-T V.22bis (up to 1200 bps) analogue modems can also be used. This is the
generally used modulation for electronic transaction in data readers and other similar
tele-services.
CLIP (Call line identification presentation)
The F151s units include the call line presentation feature, in accordance with ETSI
standards, based on the transmission of characters through DTMF tones. This is the
most common standard although not the only one on the market.
Generation of 12 and 16 kHz rate pulses
The FD10 can generate 12 or 16 kHz rate pulses to the telephone connected to the fixed
cellular terminal. These pulses are generated according to Advice of Charge (AOC)
received from the GSM system.
Fax and data services in the RS232 connector of the FD10
RS232 data services
The FD10 incorporates a GSM modem, which makes it possible to directly connect a
personal computer to transmit and receive data. No additional modem is needed, as the
FD10 is a modem itself. Therefore, with the FD10 and a personal computer you can get
the most out of a fixed cellular network.
Data transmission speeds of up to 38400 bps can be achieved through V42bis
compressing.
RS232 fax services
This service is provided in compliance with the interface specification RS232 and
according to standards V.25ter, ANSI/EIA/TIA-578-1990, EIA-SP2388, ANSI/TIA/EIA-
592-1993 and ANSI/TIA/EIA-605-1992.
LCD display in the FD10
The FD10 also includes a screen on which the status of the fixed cellular terminal is
reported. Subscriber services provided by the F121s Residential and F151s Business
units can be run via this screen. It provides an easy way to use these services.
A menu system controlled by the keyboard of the telephone connected to the fixed
cellular terminal enables several functions to be carried out on the screen:
terminal configuration, obtaining CLI, short message reading, activation/deactivation and
use of supplementary services, RSSI metering during installation, etc.
This advantageous solution enables the FD10 to be used as a test handset for
installation and maintenance equipment. All the necessary information can be obtained
on the FD10 screen and the keyboard of the telephone connected to the fixed cellular
terminal can be used to go from one menu to another.