Anthem Audio MCA 30 Stereo Amplifier User Manual


 
1. INTRODUCTION
Thank you for purchasing the Anthem MCA Power Amplifier.
MCA series amplifiers are made in 2, 3, and 5-channel versions. Anthem products are engineered to recreate
the passion of a live musical performance and thrill of the best movie theaters by using the highest level of
circuit design, superior build quality, innovative features, and intuitive ergonomics.
1.1 BEFORE OPERATING THE AMPLIFIER
Check that you have received everything in the Packing List below and report any discrepancies to your
dealer as soon as possible. Retain all packing materials and use them for any future shipment.
Packing List:
Amplifier
Power Cord (North America only)
Operating Manual
Keep the invoice that you received from your authorized Anthem dealer at time of purchase – without
it, service will not be provided under warranty.
Safety Instructions:
Read all safety precautions and instructions at the beginning of this manual.
Do not connect power if there are any signs of damage to any part of the exterior.
The Front Panel power buttons and the Rear Panel switch do not disconnect the product from the
AC line. Ensure that the power cord remains readily accessible at all times.
To connect power, only use the supplied double-insulated power cord.
Allow adequate ventilation to ensure reliable operation and to prevent overheating. The amount of
space required above the unit for radiation depends on ambient air temperature and circulation.
Installation inside a cabinet with a front that can be closed is not recommended unless a fan is also
installed to adequately draw air away from the top of the unit.
Failing to comply with any safety instruction, precaution, or warning in this Operating Manual is in
direct violation of the standards of design, manufacture, and intended use of the product.
Anthem and any related party assume no liability for the user’s failure to comply with requirements.
1.2 IN-USE NOTICES
Disconnect the power cord before connecting or disconnecting any components.
Do not remove the top cover.
Do not modify the product.