Filter
Top Products
BREAK-IN TIME
As with all audio electronic products, the ultimate sonic char-
acter of the Amp 1 will not be realized until and unless the
unit receives a minimum of approximately 70 hours of signal
break-in time (i.e. the Amp 1 is on and outputting a signal).
PLACEMENT FOR PROPER VENTILAT I O N
The Amp 1 requires a minimum of 12” (30cm) above and 6”
(15cm) at each side, of unobstructed air space. Make sure
that the ventilation slots on the top, sides and bottom
remain unobstructed by any object. Do not stack any other
component on top of the AMP 1 or block the ventilation
slots in any way. Also, be sure that the AMP 1 is placed on
a secure, hard and level surface, n o t on carpet.
SAFETY INSTRUCTIONS
1. Ventilation - Your Amp 1 generates considerable heat in use,
be sure that the ventilation slots in the top cover have at least
12” of unobstructed air space above them.
2. Water and Moisture - This product should not be used
near water. To prevent fire or shock hazard, do not expose
this product to rain or moisture.
3. Heat - This product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
appliances which produce heat.
4. Power Sources - This product should be connected to an
AC power source of the proper rated voltage. The original
shipping container will stipulate the AC voltage this unit can
operate with correctly.
5. Cleaning - A regular dusting with a soft, non-abrasive
cloth will generally keep the finish of the faceplate and chas-
sis looking like new. At no time should you allow any liquid to
come in contact with the Amp 1; it may run into the electron-
ic circuitry and cause damage which will not be covered
under your warranty.
6. Servicing - Do not open this product. No user serviceable
parts inside. Refer servicing to an authorized service technician.
7. Non-Use Periods - The power cord of this product should
be unplugged from the outlet when left unused for an
extended period of time.
8. Do not remove the Amp 1 covers while the unit is “on”, or
connected to an AC power source. Cover screws could fall
through the ventilation slots and cause electrical damage to
the Amp 1.
PACKING MAT E R I A L S
Please retain all of the packing material and shipping boxes
for your Amp 1. They are custom designed to prevent ship-
ping damage from occurring. Sonic Frontiers, Inc. will
accept no responsibility for any damage occurring to an
Amp 1 that is shipped in packing material other than the
original Sonic Frontiers packing material.
DISCLAIMER OF LIABILITY
Under no circumstances does Sonic Frontiers, Inc.
assume liability or responsibility for injury or damages
sustained in the use or operation of this equipment or for
damages to any other equipment connected to it.
Sonic Frontiers, Inc. reserves the right to make design
changes or improvements without the obligation to revise
prior versions. All specifications are subject to change
without notice.
LIMITED FIVE YEAR WA R R A N T Y
Sonic Frontiers, Inc. warrants to the purchaser that each
Amp 1 is free of manufacturing defects for a period of five
(5) years from the date of purchase. This five (5) year lim-
ited non-transferable warranty excludes all vacuum tubes,
which we warrant for a period of twelve (12) months. To
receive this warranty, the original purchaser must com-
plete and mail to Sonic Frontiers, within thirty (30) days
from the date of purchase, the enclosed Warranty
Registration Card. Sonic Frontiers, Inc. will then validate
the warranty to the original purchaser. This warranty is
subject to the following conditions and limitations:
1
. Warranty applies only to the original purchaser.
2. This warranty is void and inapplicable if the product has
been handled other than in accordance with the instruc-
tions in this Operating Manual, abused or misused, dam-
aged by accident, neglect or in being transported, or the
defect is due to the product being tampered with, modi-
fied or repaired by anyone other than Sonic Frontiers, Inc.
or an authorized Sonic Frontiers repair depot.
3. Warranty does not cover normal maintenance.
7