Filter
Top Products
Serial Control Strings
71
Mi Series and Tango Audio Controllers
Command Messages (Cont.)
MSRGs,b8,b7,
b6,b5,b4,b3,
b2,b1
Create Room Grouping, where:
1) 's' is the source which to associate the
rooms, (1-8)
2) 'b8'... 'b1' is a binary room selection bit-
map where all rooms to be grouped have a
binary 1 in the room position. The most sig-
nificant bit in 'b8' is for room 64 and the least
significant bit in 'b1' is for room 1.
Eg:
Use ’MSRG2,0,0,0,0,0,0,3,255’
to group zones 1-10 to source 2
Note: A room grouping will be considered
invalid if there are not at least two rooms
selected for the group.
Room Grouping Status:
"MRGSz,s,b8,b7,b6,b5,b4,b3,b2,b1"
where:
1) 'z' is the zone ID, valid values are:
0: no zone ID - all rooms in selection
are not in a grouping
1..32: zone ID
2) 's' is the source the rooms are currently
associated with
3) 'b8'…'b1' is a binary room selection
bitmap where all rooms to be grouped
have a binary 1 in the room position.
The most significant bit in 'b8' is for
room 64 and the least significant bit in
'b1' is for room 1.
Note: If none of the bits are set in the room
selection bitmap, then the room grouping has
been removed.
- or -
ERR
MARGg,r Add Room to Group, where:
1) ‘g’ is any room already in the group, (1-64)
2) ‘r’ is the room, (1-64)
Room Grouping Status:
"MRGSz,s,b8,b7,b6,b5,b4,b3,b2,b1"
where:
1) 'z' is the zone ID, valid values are:
0: no zone ID - all rooms in selection are
not in a grouping
1..32: zone ID
2) 's' is the source the rooms are currently
associated with
3) 'b8'…'b1' is a binary room selection
bitmap where all rooms to be grouped
have a binary 1 in the room position.
The most significant bit in 'b8' is for
room 64 and the least significant bit in
'b1' is for room 1.
Note: If none of the bits are set in the room
selection bitmap, then the room grouping has
been removed.
- or -
ERR