AMX DAS-T0808-SIG Stereo System User Manual


 
Setup and Configuration
36
Tango Series Audio Controllers
When you return to the Backlight Intensity options screen, the selected intensity setting will appear
in brackets.
To exit the screen, select Quit.
Backlight - Mode
Select Mode to access the Backlight Mode options screen (FIG. 48):
To change the backlight Mode, select the option (i.e. Auto On, Always On, or Always Off).
Auto On (default): The backlight will remain on when accessing and using the Setup/Programming
Menus from the front of the Controller. 30 seconds after exiting the Menus, the backlight will turn
off.
Always On: backlight remains on at all times
Always Off: backlight remains off at all times, even when accessing the Setup/Programming
Menus.
When you return to this screen, the option chosen will appear in brackets.
To exit the screen, select Quit.
About Options screen
Select About from the Main Menu screen (FIG. 22) to display the About Options screen (FIG. 49):
Device Status
The Device Status menu displays the software version for the following components (where applicable):
Multi Room Controller (MRC)
Expansion Units 1 – 7 (X1 – X7)
All Main Keypads & Aux Keypads connected to the main Controller
All Main Keypads & Aux Keypads connected to each Zone Expander
1. From the System Setup Mode screen, select About (FIG. 50):
FIG. 48 Backlight Mode options screen
FIG. 49 About options screen
Return to the previous screen
Select an mode setting
To the Reprogram LCD Keypad scree
To the Device Status screen
Return to the previous screen