AMX DAS-T0808-SIG Stereo System User Manual


 
Installation
8
Tango Series Audio Controllers
SWT Connectors
SWT cabling follows a specific pinout configuration that is labelled on the Tango Controller, Metreau keypads,
and other Matrix devices, as shown in FIG. 5.
Connecting SWT Keypads to the Tango Controller
Metreau keypads connect to the 4-pin connectors labelled Zone 1, 2, 3 etc. on the rear panel (FIG. 6):
Connecting SWT Speakers to SWT Keypads
Connect SWT speakers to the 4-pin connector labelled TO SPEAKERS on the rear of the SWY keypads
(FIG. 7).
Refer to the Metreau Keypads Operation/Reference Guide for additional details.
FIG. 5 SWT pinout configuration
FIG. 6 Connecting Zone Outputs
FIG. 7 Connecting SWT keypads and SWT speakers
LDGR
L = Left audio channel (+)
D = Data / Power (+)
G = Ground (-) - also provides return for L/R Audio
R = Right audio channel (+)
LDGR
R
G
D
L
TO CONTROLLER
Zone 1
SWT Keypad
LDGR
R
G
D
L
TO CONTROLLER
Zone 2
SWT Keypad
LDGR
R
G
D
L
TO CONTROLLER
Zone 3
SWT Keypad
LDGR
R
G
D
L
TO CONTROLLER
Zone 4
SWT Keypad
Zone Outputs on Tango Audio Controller
LDGR
Zone Output connector
on Tango Controller
SWT connectors on keypad
SWT Speakers
R+
L
D
G
R
TO CONTROLLER
TO SPEAKERS
R-
L+
L-