AMX DAS-SIRIUS Stereo Receiver User Manual


 
SIRIUS Messages
23
DAS-SIRIUS Sirius Tuning Module for Mi-Series Audio Controllers
SIRIUS Messages
Overview
Messages specific to the DAS-SIRIUS tuner module that can be displayed on the Controller or LCD
Keypad include:
When first powering ON the Controller, and the user selects the SIRIUS source, the
Initializing SIRIUS message is displayed, until the signal is detected.
Channel in Tuning is displayed until the channel is tuned, then the standard SIRIUS metadata
is displayed.
SIRIUS ID Display
The SIRIUS ID can be displayed from two places:
Controller > Setup/SIRIUS/ID
LCD Keypad by keying in channel 0 from the numeric screen (or by tuning to channel 0 using
the CH + / - buttons).
Invalid Channels
Invalid Channels will be automatically skipped when navigating channels via CH+/-.
Loss of Signal: “Acquiring Signal”
Antenna Error: “Antenna Error”
Subscription Updates: “Subscription Updated”
Channel Map Updates: “Updating Channels”
Invalid Channel: “Invalid Channel”
Unsubscribed Channel: “CALL 888-539-SIRIUS TO SUBSCRIBE”
When initially powering ON the Controller, the display of metadata on the LCD
Keypad may be slower until it is buffered by the SIRIUS module. Since the Controller
is always ON, therefore, the SIRIUS module is always on, so this delay is only
noticeable when first installing the Matrix Distributed Audio system.