AMX AVB-DA-RGBHV-0102 Stereo Amplifier User Manual


 
Installation Guide
Solecis AVB-DA-RGBHV-0102
Overview
The Solecis AVB-DA-RGBHV-0102 1x2 RGBHV HD-15 Distribution Amplifier
(FG1340-1200-01) is a high bandwidth, high resolution 1x2 VGA through to
UXGA distribution amplifier. With a video bandwidth in excess of 350MHz the
AVB-DA-RGBHV-0102 is the ideal choice for all presentation applications.
The AVB-DA-RGBHV-0102 incorporates buffered outputs to ensure signal
integrity when distributing data and video to projectors, monitors and plasma
displays.
The AVB-DA-RGBHV-0102 comes complete with an external 12V power supply.
Signal and picture quality can be further maintained over long distances by using
true high quality VGA cable.
Product Specifications
Safety Instructions
Please read these instructions before using your AMX Solecis device. Failure to
comply with these instructions could result in fire, electrical shock, personal injury,
death, or damage to the equipment.
Liquid Spills
Do not set drinks on top of the unit or immerse the unit in liquid.
Do Not Disassemble
This device contains no user serviceable parts. All servicing must be performed by a
qualified service technician.
For Safety Reasons
Do not place the unit on an unstable surface.
Do not use near water or sources of heat.
Use only recommended attachments.
Use the type of power supply as specified.
Unplug the power to the unit and refer servicing to qualified personnel under the
following conditions:
If liquid has been spilled or the unit has been exposed to rain or water.
If it does not operate normally when the operating instructions are followed or if it
exhibits a distinct change in performance indicating a need for service.
If the unit has been dropped or the cabinet damaged.
Video Pin Connections
FIG. 2 provides the pin layout for the HD-15 connectors:
The pin configuration for the HD-15 (video) connector are as follows:
FIG. 1 Solecis AVB-DA-RGBHV-0102
AVB-DA-RGBHV-0102 Specifications
RGB Input
Number: 1
Connector: HD-15
Level: Analog
Max Level: 1V p-p
Impedance: 75 ohm
Sync Input
Type: Analogue or TTL
Impedance: 470 ohm
RGB Video Bandwidth: 400MHz -3dB
RGB Return Loss: -45dB@10MHz, -27dB@100MHz
Sync Processing: TTL restore
RGB Output
Number: 2
Connectors: HD-15
Level: Analog
Gain: Unity
Impedance: 75 ohm
Sync Output
Level: TTL
Impedance: 75 ohm
Power
Input Voltage: 9VDC
Power Consumption: 3W
Dimensions (HWD): 1.18” x 5.90” x 2.12” (3.0cm x 15.0cm x 5.4cm)
Weight: 0.62 lbs. (0.28kg)
(rear)
(front)
Video IN
Power
connector
Video OUT 1 Video OUT 2
AVB-DA-RGBHV-0102 Specifications (Cont.)
Certifications: CE
•UL
FCC class B, part 15
RoHS/WEEE compliant
FIG. 2
RGBHV connector
1 - RED 9 - n/c
2 - GREEN 10 - SYNC GROUND
3 - BLUE 11 - n/c
4 - n/c 12 - n/c
5 - n/c 13 - H SYNC
6 - RED GROUND 14 - V SYNC
7 - GREEN GROUND 15 - n/c
8 - BLUE GROUND
12345
678910
1112131415