AMAX Tech MCD381 Stereo System User Manual


 
Contents MCD381 8cm CD/MP3/WMA PLAYER-FM TUNER
Function
LCD Display
7
FM Mode
No icon illuminates the playing is in FM Mode.
While user switches to FM Mode by pressing and hold the Mode/CD-FM button,
Line 1 display: FM XXXMHz
Line 2 displays: [P XX] ST
For details please Refer to FM Mode.
Directory Number
Shall display the directory number being played. If it is in root directory, displays ‘01
If it is an audio CD, shall display ‘ESP’ or ‘CDA’ instead.
Track Number
Shall display the track number being played.
Track Time
Shall display the time elapsed in the track. Track Time shall display the total time of this track first before the track to be
playback. When it stars to playing back the music, it reset to 00:00 and count the time.
Volume Level
Shall overlay the line 2 displays and indicate the volume level numerically when the Volume Buttons are pressed. After a
short time, the indicator shall then disappear and be replaced by the line 2 displays. The available range of volume levels shall
be 0 to 32 and shall be distributed with a wide delta at the low end of the scale (i.e. non-linear volume scale).
e.g. VOL [ 25 ]
Lock
There is not an indicator to show the status of Hold button in the player or line remote, but when any key in the player is being
pressed, the LCD shall display ‘Main Lock’ and overlay in line 2 for 250ms to indicate the Hold/Release switch in the player is
in the on position.
If it is the Hold button in the line remote control in lock position:
When any key in the line remote is being pressed, the unit shall display ‘Remote Lock’ and overlay in line 2 for 250ms to
indicate the Hold/Release switch in line remote is in the on position.