Filter
Top Products
17
EN
Whenever you turn on your Altec Lansing Mix speaker system, the Altec
Lansing logo will appear for approximately 3 seconds followed by a
personalized message, if you’ve set one. The Mix comes with no preset
power-on message. To create a personalized message, just follow these
instructions:
1 Enter the Message Screen Edit Mode.
Press and hold the “SOURCE,” “EQ,”
and buttons. All four
buttons must be pressed at approximately the same time while the
Altec Lansing logo is displayed. The following message will appear on
the LCD: “Add a personal message by selecting letters with the track
buttons and rotary control.”
2 Add your personal message.
Rotate the
knob until the desired letter, number or symbol is
displayed. Press the
button to make your selection and move to
the next space. Continue this process until your entire message is
displayed.
3 Exit the Message Screen Edit Mode.
Press the
knob to save the message and exit the Message Screen
Edit Mode.
How to Delete a Personalized Message
1 Enter the Message Screen Edit Mode.
Press and hold the “SOURCE,” “EQ,”
and buttons. All four
buttons must be pressed at approximately the same time while the
Altec Lansing logo is displayed. The following message will appear on
the LCD: “Add a personal message by selecting letters with the track
buttons and rotary control.”
2 Clear the message.
Press the “SOURCE” button to clear the message.
3 Exit the Message Screen Edit Mode.
Press the
knob to exit the Message Screen Edit Mode.
Maintaining Your Speaker System
Place your speaker system on a level surface away from sources of direct
sunlight or excessive heat.
Protect your furniture with a cloth or other protective material when placing
your speaker system on a natural wood or lacquered finish.
Clean your speaker system with a soft cloth moistened only with mild soap
and water. Stronger cleaning agents, such as benzene, thinner or similar
materials, can damage the surface of the unit.
Personalizing the Power-On Message