AKG Acoustics D660S Headphones User Manual


 
D 660 S
Description
The AKG Model D 660 S is a rugged dynamic
hypercardioid microphone intended for on-stage instrumental
and vocal pickup. Its hypercardioid pattern is uniform with
frequency, and response has been boosted at mid and high
frequencies for crisp instrumental pickup and improved
speech intelligibility. The microphone has a heavy duty steel
screen with an integral support frame. The inner pop filter
can be removed for cleaning or for replacement. The
microphone incorporates a Doubleflex™ mounting system
used to isolate the capsule assembly. This system places the
primary resonance of the moving system to well below the
audible range, resulting in excellent isolation of handling and
cable induced noises. The light-weight body is die cast zinc
alloy and has a dark matte finish for minimum reflection and
glare.
Features
Response tailored for instrumental
and vocal on-stage performance
Frequency independent
hypercardioid pattern for added
immunity to feedback
Very low handling noise through
use of AKG’s Doubleflex™ anti-
vibration isolation system
High sensitivity (2.0 mV/Pa)
resulting from use of high-energy
neodymium-iron-boron magnet
Light-weight die cast metal body
with dark matte finish
Replaceable inner pop filter
Specifications
Transducer type: Dynamic pressure gradient
Frequency response: 70 - 20 kHz (20 - 20 kHz @ 2 cm)
Polar pattern: Hypercardioid
Impedance: 500 ohms
Recommended load impedance: 1,200 ohms
Output connector: 3-pin male XLR-M
Sensitivity: 2.0 mV/Pa; -54 dBV (re 1 V/Pa)
Sound pressure level for 1% (3%) THD:
140 dB SPL (150 dB SPL)
Finish: Matte black enamel
Size: Maximum diameter: 2 in. (50 mm)
6.6 in.length (166 mm)
Net weight: 8.5 oz. (240 g)
Shipping weight: 15 oz. (420 g)
Accessories included: SA 44 Stand adapter
Optional accessories: SA 41/1 Stand adapter
ST 45, ST 305 Table stands
H 30 Universal shock mount