Aiwa JAX-N88 Stereo System User Manual


 
Timer
23
GB
You can set the system to turn off after a certain
time, so that you can fall asleep to music.
Press SLEEP.
Each time you press the button, the minute
display (the turn-off time) changes cyclically as
follows:
AUTO* t 90MIN t 80MIN t 70MIN
tt 10MIN t OFF
* The system automatically turns off in 100 minutes or
after the current disc or tape finishes playing.
Other Operations
* You cannot check the remaining time if you select
“AUTO”.
Note
Do not set to “AUTO” during Synchro Recording on a
tape.
Tip
You can use the Sleep Timer, even if you have not set
the clock.
You can wake up to music at a preset time. Make
sure you have set the clock (see “Setting the
clock” on page 9).
Use buttons on the remote for the operation.
1 Prepare the sound source you want to
play.
CD: Load a disc. To start from a specific
track, make a program (see “Creating
your own program” on page 13).
Tape: Load a tape with the side you want
to play facing forward.
Tuner: Tune in the preset radio station
(see “Listening to the radio” on page 16).
2 Press VOLUME +/– to adjust the
volume.
3 Press CLOCK/TIMER SET.
4 Press . or > repeatedly to select
“PLAY SET”, then press ENTER.
“ON” appears and the hour indication
flashes.
5 Set the time to start playing.
Press . or > repeatedly to set the
hour, then press ENTER.
The minute indication flashes.
Press . or > repeatedly to set the
minute, then press ENTER.
6 Set the time to stop playing following
the same procedure as step 5.
7 Press . or > repeatedly until the
desired sound source appears.
Each time you press the button, the display
changes cyclically as follows:
Timer
Falling asleep to music
— Sleep Timer
To Press
Check the
remaining time*
SLEEP once.
Change the time
to turn off
SLEEP repeatedly to select the
time you want.
Cancel the Sleep
Timer Function
SLEEP repeatedly until “SLEEP
OFF” appears.
Waking up to music
—Play Timer
t
TUNER
y
CD PLAY
T
t
TAPE PLAY
T
continued