Aiwa CX-NMT240 CD Player User Manual


 
II
Setting this unit to power economizing mode reduces power
consumption as follows.
When the power is turned off, all the display lights turn off.
F{owever, if the clock is not set, the game Demo (page 7) will
begin when the power is turned off.
If CD or Tape does not play for 10 minutes or if there is no
audio input from any connected external equipment for 10
minutes when VIDEO/AUX is selected as the source, the power
shuts off.
When the power turns on due to timer recording (page 21), the
clisplay brightness level is set to “DIMMER 3 (page
7), all button
lamps are off, and the volume is set to the minimum level (0).
The display brightens only when operating the unit. When the
unit has not been used for 10 seconds, the brightness level
switches to the mode previously selected in “DIM MODE. (Pa9e
;’)
(If the display brightness level is set to “DIM-OFF”, the
brightness does not change. When the level is “DIMMER 3“,
the button lamps are also turned off.)
1
2
3
Press ECO.
“ECO MODE” will be displayed.
Press ENTER within 4 seconds.
The current power-economizing mode status will be displayed.
If the power-economizing mode is OFF: ECO OFF
If the power-economizing mode is ON: ECO ON
Turn MULTI JOG within 4 seconds to switch the
power-economizing mode on or off.
Example: When “ON” is selected
The mode will be automatically set after 4 seconds. It will
also be set if ENTER is pressed within 4 seconds after step
3.
Standby power consumption
If the power-economizing mode is OFF: 19 W
If the power-economizing mode is ON: 1.6 W
m
To view the clock when all the display lights turn off, press II or
ENTER so that the time is displayed for 4 seconds.
8 ENGLISH