Aiwa AWP-ZP5 Home Theater System User Manual


 
Tuner
13
GB
Other operations
Tips
The program you made remains after Program Play
finishes. To play the same program again, press N
(or CD N on the unit). However, the program is
cleared when you press Z on the unit.
“– –.– –” appears when the total CD program time
exceeds 100 minutes, or when you select a CD track
whose number is 21 or over, or when you select an
MP3 audio track.
You can preset up to 20 FM stations and 10 AM
stations. You can then tune in any of those
stations simply by selecting the corresponding
preset number.
Automatic tuning preset
You can automatically tune in all of the stations
that can be received in your area and then
manually store the radio frequency of the
desired stations.
1 Press TUNER BAND (or FUNCTION
repeatedly) to switch the function to
tuner.
2 Press TUNER BAND repeatedly to
select “FM” or “AM”.
3 Press TUNING MODE repeatedly until
“AUTO” appears in the display.
4 Press TUNING + or –.
The frequency changes as the system scans
for a station. Scanning stops automatically
when a station is tuned in. At that time,
“TUNED” and “STEREO” (for stereo
program only) appear.
If “TUNED” does not appear and the
scanning does not stop
Set the frequency of the desired radio
station as described in steps 3 and 4 of
“Manual tuning preset” (page 14).
To Do this
Cancel Program Play Press PLAY MODE in
stop mode repeatedly until
“PGM” disappears.
Clear a track from the end Press CLEAR in stop
mode.
Tuner
Presetting radio stations
continued