Filter
Top Products
8
En
ADJUSTMENTS BEFORE OPERATIONS
Power
Turning the unit on
Press POWER 6STANDBY/ON (POWER on the remote
control).
Pressing TAPE, TUNER, VIDEO/AUX or CD also turns the unit
on (Direct Play Function.) When a disc or tape is inserted, the
playback will start automatically.
Turning the unit off
Press POWER 6STANDBY/ON again.
The unit goes into standby.
DEMO
If the clock has not been set, a DEMO appears on the display
when the unit is turned off.
To deactivate and activate the DEMO
Press DEMO/ECO
when the unit is turned off.
Spectrum analyzer display
You can change the spectrum analyzer display.
Press DISPLAY (SHIFT+DISPLAY on the remote
control) repeatedly to select one of the three
spectrum analyzer displays.
- NORMAL: Displays the fluctuation from low frequencies to
high ones
- BASS : Displays the fluctuation of low frequencies only
- LEVEL: Displays the fluctuation of the average of all the
frequencies.
Volume
Turn VOLUME (Press VOLUME +, - on the remote
control).
Adjust from 0 (minimum) to 30 and MAX (maximum).
Tip:
Volume level setting is retained during power-off standby. If
the unit is turned off with the volume set to 17 or more, it is
automatically turned down to 16 the next time the unit is turned
on.