Aiphone AXW-PA1 Speaker System User Manual


  Open as PDF
of 1
 
- INSTRUCTIONS -
The AXW-PA1 Paging Adaptor allows paging to external speakers from a door station zone on the AX
Central Exchange Unit. For each zone of paging, use one AXW-PA1 with the appropriate sized
amplifier. The AXW-PA1 provides outgoing paging only. Talkback is not available.
WIRING DIAGRAM:
Paging Adaptor
Use with:
AX Series
OUTPUT To Paging Speakers
AXW-PA1*
SPECIFICATIONS:
Input: Plugs into door output of AX CEU
RJ45 jack: Approx. 16" in length. If longer
cable needed, use RJ45 female
coupler with additional CAT-5e
cable.
Distance: 980' with CAT-5e from AXW-PA1 to
AX CEU
Output: 600 ohm, 0dB or -20dB
Amplifier input: Line Level (600 ohms)
Dimensions: 4-1/8"H x 2-1/2"W x 1-1/2"D
Amplifier
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
(425) 455-0510
FAX (425) 455-0071
TOLL FREE TECHNICAL SUPPORT:
(800) 692-0200
E-MAIL: tech-serv@aiphone.com
AXW-PA1 Instr
0107JDJS
600 ohm, non-polarized
AX-248C
Wht
Wht
INPUT
OUTPUT
GAIN
L H
Set GAIN switch to match amplifier's
input level. (Default in L position.)
High Gain: 0dB output to 600 ohm load
Low Gain: -20dB output to 600 ohm load
Note:
Only information pertaining to the connection and operation of the AXW-PA1 is included here. For complete installation, wiring, and programming
information regarding the AX system, please refer to the AX Installation Manual which is included on the CD provided with the AX CEU.
*AXW-PA1 must connect to a door
input (D1-D8~D24) on AX CEU.
Do not connect to master inputs
(M1-M4~M8).
CAT-5e RJ45
connector
AX-8M
MASTER STATIONDOOR STATION DOOR STATION DOOR STATION
DC 24V
PROGRAMMING:
1. Follow standard AX programming procedures as described in
the AX Installation & Operation manual (included on CD with
the AX CEU).
2. When configuring door stations, be sure to set the station
number corresponding to the AXW-PA1 to “Audio” in the AX
setup utility.
OPERATION:
1. Select station button on master that corresponds to the
channel number that the AXW-PA1 is plugged into.
2. Press TALK on master and make paging announcement.
3. Press OFF to conclude page.