18
Clock and Timer
Accessing the digital clock
The Wi-Fi Internet Radio also includes a digital
clock which will be automatically updated when
connected with the Internet.
Wi-Fi connection
strength
Current temperature
• Press to show the clock without
interrupting audio playback.
• To hide the clock and return the display to
the previous screen, press
again.
• The clock is also displayed when the radio is
turned off (standby mode).
Setting the clock
With your ZIP code set, the clock time will be
automatically updated when connected with the
Internet. However, you may still be able to set it
manually. Day, date and month can only be
updated by connecting with an Internet radio
station.
1. Press and hold
until the hour time is
highlighted (reversed color) on the display.
2. Press or to select the hour time.
3. Press or to shift to minute time.
4. Press or to select the minute time.
• If you have set the clock to 24-hour display
mode (refer to page 29), press SELECT after
setting the minute time and skip steps 5-7.
5. Press
or to shift to AM/PM.
6. Press
or to select between AM and PM.
7. Press SELECT again to confirm the setting.
You may also adjust the clock time
manually and turn off the automatic
time update (Auto Sync) when
connected with the Internet. Refer to
Advanced Settings on page 27 for more
information.
Sleep mode
You can set the radio to play for a set length of
time before turning off automatically.
1. Press SLEEP to turn on the Sleep mode while
listening to the radio.
• The default time is 15 minutes.
• If the radio is off, press SLEEP to turn on the
Sleep mode with the last used channel.
2. If necessary, press SLEEP again to add extra
sleep time up to 90 minutes. Each press of
the button will add 15 minutes.
• The remaining time before turning off
automatically will show at bottom right of
the clock display, replacing the weather
information.
• Select OFF (press SLEEP once more after 90
min) if you decide not to use the sleep mode.
The radio will turn off.
• To cancel the Sleep mode sooner, press ON/
STANDBY.