Arcam CD62 CD Player User Manual


 
CD62
7
Digital to Analogue conversion
24-bit multilevel Delta-Sigma DAC
Laser pick-up 3 beam
Laser wavelength 780nm
Numerical aperture 0.45
Dynamic range 106dB
Signal to noise ratio (CCIR) >100dB
Harmonic distortion (0dB, 1kHz) <0.005%
Frequency response (±0.5dB) 5Hz20kHz
Output level (0dB) 2.3Vrms
Output impedance 120
Minimum recommended load 5k
Technical specifi cation
Physical
Dimensions W430 x D290 x H84mm
Weight 4.6kg nett/6.1kg packe
Power consumption 32VA maximum
Digital output connection 75 co-axial
optical TOSLINK
Supplied accessories
Mains lead
CR224 remote control
2 x AAA batteries
E&OE
Continual improvement policy
Arcam has a policy of continual improvement for its products.
This means that designs and speci cations are subject to
change without notice.
Radio interference
The CD62 is a digital audio device which has been designed to
very high standards of electromagnetic compatibility.
The CD player and DAC generate, and can radiate RF (radio
frequency) energy. In some cases this can cause interference
with FM and AM radio reception. If this is the case, keep the CD
player and its connecting cables as far from the tuner and its
aerials as possible. Connecting the CD player and the tuner to
different mains sockets can also help to reduce interference.
EC COUNTRIES - This product has been designed to comply
with directive 89/336/EEC.
USA This product complies with FCC requirements.
Laser radiation
If an Arcam CD player is operated whilst the outer casing is
removed, invisible laser radiation could cause eye damage.
NOTE: All speci cation values are typical unless otherwise
stated.