Arcam DT91 Stereo System User Manual


 
DT91
E-8
English
DT91
E-9
The CR-389D remote control
FM DAB
PROG DISP
RPT
MODE BAND
1-9 2-10 3-11
FM
DAB
SEL
TUNER
CR-389
CD
AMPLIFIER
VCRDVD TAPEAV
TUNERCDAUXPHONO
ENTER
SP1
SP2
DISP
MENU DISP
4-12
5-13 6-14 7-15 8-16
FM/DAB
Use this button to switch between FM and
DAB mode. The LED above the FM/DAB
button is lit brie y when the button is
pressed to show which mode is selected.
Preset memory buttons
These buttons allow access to individual preset
stations. To select a preset press the corresponding
button. For presets 9 to 16, press and hold the
corresponding preset button for two seconds.
Note: Remember to install the two AAA batteries
supplied before trying to use your remote control.
Do not place anything in front of the tuner (where the
IR receiver is located), or the remote control may not
work.
TUNE buttons
These buttons enable you to scroll through the
available stations.
For more information on tuning radio stations
in, see the sections ‘Searching for radio
stations: DAB’ and ‘Searching for radio
stations: FM’ on page 6 and 7.
BAND
This button has the same function as
SELECT on the front panel.
MODE
This button has the same function as
DISPLAY MODE on the front panel.
Ampli er controls
These buttons offer basic control over
Arcam ampli ers.
CD player controls
These buttons offer basic control over Arcam CD
players.
DISP
This button toggles the tuner’s display
between on and off.
MENU
This button has the same function as the
MENU button on the front panel of the tuner.