Arcam DT91 Stereo System User Manual


 
DT91
E-10
English
DT91
E-11
Remote-control codes
Power commands
Command Decimal Code
Power on 123
Power off 124
Tuner control commands
Command Decimal Code
Select DAB 126
Select FM 127
MENU
61 or 125
DISP
18 or 71
1–9
1 or 91
2–10
2 or 92
3–11
3 or 93
4–12
4 or 94
5–13
5 or 95
6–14
6 or 96
7–15
7 or 97
8–16
8 or 98
MODE
37 or 121
<
33 or 78
>
32 or 77
BAND
50 or 87
The following table gives the IR commands accepted by the DT91. The system code for the DT91 is 17
(in common with other Arcam tuners).
Guarantee
Worldwide Guarantee
This entitles you to have the unit repaired free of charge, during the rst two years after purchase, at
any authorised Arcam distributor provided that it was originally purchased from an authorised Arcam
dealer or distributor. The manufacturer can take no responsibility for defects arising from accident,
misuse, abuse, wear and tear, neglect or through unauthorised adjustment and/or repair, neither can
they accept responsibility for damage or loss occurring during transit to or from the person claiming
under the guarantee.
The warranty covers:
Parts and labour costs for two years from the purchase date. After two years you must pay for both parts
and labour costs. The warranty does not cover transportation costs at any time.
Claims under guarantee
This equipment should be packed in the original packing and returned to the dealer from whom it was
purchased, or failing this, directly to the Arcam distributor in the country of residence.
It should be sent carriage prepaid by a reputable carrier – not by post. No responsibility can be accepted
for the unit whilst in transit to the dealer or distributor and customers are therefore advised to insure the
unit against loss or damage whilst in transit.
For further details contact Arcam at:
Arcam Customer Support Department,
Pembroke Avenue, Waterbeach, CAMBRIDGE, CB5 9QR, England.
Problems?
If your Arcam dealer is unable to answer any query regarding this or any other Arcam product please
contact Arcam Customer Support at the above address and we will do our best to help you.
On line registration
You can register your Arcam product on line at: www.arcam.co.uk