Filter
Top Products
3M™ Super Close Projection System SCP712 Operator’s Guide
© 3M 2008. All Rights Reserved. 20
Remote Control Functions
Aim the remote control toward the projection screen or at the sensor. Press desired remote control button to send
a signal to the projector.
ON/
STANDBY
Press to enter Standby mode.
Note: A confirmation message will display to ensure unit
does not get turned off accidentally.
INPUT/
SOURCE
Press and press again to select different
computer and video inputs.
[Computer 1/Componet 1 ➙ Computer 2/Componet 2 ➙
RCA Composite Video ➙ S-Video]
Volume +:
Press to increase speaker volume.
Volume -:
Press to decrease speaker volume.
Mute:
Press to switch the audio sound ON or OFF.
Menu:
Press to display the Main Menu. When a
menu is open, press to exit menu.
R/Click
Performs remote Right Mouse click function.
Up Arrow
Moves cursor upward through menu items.
Down Arrow
Moves cursor downward through menu
items.
Left Arrow
Moves cursor left through menu items.
Moves .ppt slides backwards.
Right Arrow
Moves cursor to right through menu items.
Moves .ppt slides forward.
Mouse Pad
Allows remote mouse functions. Pan
function when in Magnify mode.
Blank:
Press to replace projected image with black
image. Press again to return projection
image.
Freeze:
Press to freeze current image. Press again
to return to active image.
Timer:
Press to initiate a 10 minute digital timer.
Change timer by pressing up/down arrows to
alter amount in 1 minute intervals.
Zoom +:
Press and hold to increase the size of the
displayed image up to 200 percent.
Zoom -:
Press and hold to decrease size of the
displayed image down to 100 percent
Bottom Trigger
Pull trigger for remote LEFT mouse button
functions. In menu mode, use for remote
Enter / Select functions.